Mask RCNN takes off from where Faster RCNN left, with some augmentations aimed at bettering instance segmentation (which was out of scope for FRCNN). Instance segmentation was achieved remarkably well in *DeepMask* , *SharpMask* and later *Feature Pyramid Networks* (FPN).

Faster RCNN was not designed for pixel-to-pixel alignment between network inputs and outputs. This is most evident in how RoIPool , the de facto core operation for attending to instances, performs coarse spatial quantization for feature extraction. Mask RCNN fixes that by introducing RoIAlign in place of RoIPool.

#### Methodology

Mask RCNN retains most of the architecture of Faster RCNN. It adds the a third branch for segmentation. The third branch takes the output from RoIAlign layer and predicts binary class masks for each class.

##### Major Changes and intutions

**Mask prediction**

Mask prediction segmentation predicts a binary mask for each RoI using fully convolution - and the stark difference being usage of *sigmoid* activation for predicting final mask instead of *softmax*, implies masks don't compete with each other. This *decouples* segmentation from classification. The class prediction branch is used for class prediction and for calculating loss, the mask of predicted loss is used calculating Lmask.

Also, they show that a single class agnostic mask prediction works almost as effective as separate mask for each class, thereby supporting their method of decoupling classification from segmentation

**RoIAlign**

RoIPool first quantizes a floating-number RoI to the discrete granularity of the feature map, this quantized RoI is then subdivided into spatial bins which are themselves quantized, and finally feature values covered by each bin are aggregated (usually by max pooling). Instead of  quantization of the RoI boundaries
or bin bilinear interpolation is used to compute the exact values of the input features at four regularly sampled locations in each RoI bin, and aggregate the result (using max or average).

**Backbone architecture**

Faster RCNN uses a VGG like structure for extracting features from image, weights of which were shared among RPN and region detection layers. Herein, authors experiment with 2 backbone architectures - ResNet based VGG like in FRCNN and ResNet based [FPN](http://www.shortscience.org/paper?bibtexKey=journals/corr/LinDGHHB16) based. FPN uses convolution feature maps from previous layers and recombining them to produce pyramid of feature maps to be used for prediction instead of single-scale feature layer (final output of conv layer before connecting to fc layers was used in Faster RCNN) 

**Training Objective**

The training objective looks like this 
![](https://i.imgur.com/snUq73Q.png)

Lmask is the addition from Faster RCNN. The method to calculate was mentioned above

#### Observation

Mask RCNN performs significantly better than COCO instance segmentation winners *without any bells and whiskers*. Detailed results are available in the paper

The main contribution of this paper is introducing a new transformation that the authors call Batch Normalization (BN). The need for BN comes from the fact that during the training of deep neural networks (DNNs) the distribution of each layer’s input change. This phenomenon is called internal covariate shift (ICS).

#### What is BN?
Normalize each (scalar) feature independently with respect to the mean and variance of the mini batch. Scale and shift the normalized values with two new parameters (per activation) that will be learned. The BN consists of making normalization part of the model architecture.

#### What do we gain?
According to the author, the use of BN provides a great speed up in the training of DNNs. In particular, the gains are greater when it is combined with higher learning rates. In addition, BN works as a regularizer for the model which allows to use less dropout or less L2 normalization. Furthermore, since the distribution of the inputs is normalized, it also allows to use sigmoids as activation functions without the saturation problem.

#### What follows?
This seems to be specially promising for training recurrent neural networks (RNNs). The vanishing and exploding gradient problems \cite{journals/tnn/BengioSF94} have their origin in the iteration of transformation that scale up or down the activations in certain directions (eigenvectors). It seems that this regularization would be specially useful in this context since this would allow the gradient to flow more easily. When we unroll the RNNs, we usually have ultra deep networks.

#### Like
* Simple idea that seems to improve training.
* Makes training faster.
* Simple to implement. Probably.
* You can be less careful with initialization.

#### Dislike
* Does not work with stochastic gradient descent (minibatch size = 1).
* This could reduce the parallelism of the algorithm since now all the examples in a mini batch are tied.
* Results on ensemble of networks for ImageNet makes it harder to evaluate the relevance of BN by itself. (Although they do mention the performance of a single model).

### What is BN:
  * Batch Normalization (BN) is a normalization method/layer for neural networks.
  * Usually inputs to neural networks are normalized to either the range of [0, 1] or [-1, 1] or to mean=0 and variance=1. The latter is called *Whitening*.
  * BN essentially performs Whitening to the intermediate layers of the networks.

### How its calculated:
  * The basic formula is $x^* = (x - E[x]) / \sqrt{\text{var}(x)}$, where $x^*$ is the new value of a single component, $E[x]$ is its mean within a batch and `var(x)` is its variance within a batch.
  * BN extends that formula further to $x^{**} = gamma * x^* +$ beta, where $x^{**}$ is the final normalized value. `gamma` and `beta` are learned per layer. They make sure that BN can learn the identity function, which is needed in a few cases.
  * For convolutions, every layer/filter/kernel is normalized on its own (linear layer: each neuron/node/component). That means that every generated value ("pixel") is treated as an example. If we have a batch size of N and the image generated by the convolution has width=P and height=Q, we would calculate the mean (E) over `N*P*Q` examples (same for the variance).

### Theoretical effects:
  * BN reduces *Covariate Shift*. That is the change in distribution of activation of a component. By using BN, each neuron's activation becomes (more or less) a gaussian distribution, i.e. its usually not active, sometimes a bit active, rare very active.
  * Covariate Shift is undesirable, because the later layers have to keep adapting to the change of the type of distribution (instead of just to new distribution parameters, e.g. new mean and variance values for gaussian distributions).
  * BN reduces effects of exploding and vanishing gradients, because every becomes roughly normal distributed. Without BN, low activations of one layer can lead to lower activations in the next layer, and then even lower ones in the next layer and so on.

### Practical effects:
  * BN reduces training times. (Because of less Covariate Shift, less exploding/vanishing gradients.)
  * BN reduces demand for regularization, e.g. dropout or L2 norm. (Because the means and variances are calculated over batches and therefore every normalized value depends on the current batch. I.e. the network can no longer just memorize values and their correct answers.)
  * BN allows higher learning rates. (Because of less danger of exploding/vanishing gradients.)
  * BN enables training with saturating nonlinearities in deep networks, e.g. sigmoid. (Because the normalization prevents them from getting stuck in saturating ranges, e.g. very high/low values for sigmoid.)


![MNIST and neuron activations](https://raw.githubusercontent.com/aleju/papers/master/neural-nets/images/Batch_Normalization__performance_and_activations.png?raw=true "MNIST and neuron activations")

*BN applied to MNIST (a), and activations of a randomly selected neuron over time (b, c), where the middle line is the median activation, the top line is the 15th percentile and the bottom line is the 85th percentile.*

-------------------------

### Rough chapter-wise notes

* (2) Towards Reducing Covariate Shift
  * Batch Normalization (*BN*) is a special normalization method for neural networks.
  * In neural networks, the inputs to each layer depend on the outputs of all previous layers.
  * The distributions of these outputs can change during the training. Such a change is called a *covariate shift*.
  * If the distributions stayed the same, it would simplify the training. Then only the parameters would have to be readjusted continuously (e.g. mean and variance for normal distributions).
  * If using sigmoid activations, it can happen that one unit saturates (very high/low values). That is undesired as it leads to vanishing gradients for all units below in the network.
  * BN fixes the means and variances of layer inputs to specific values (zero mean, unit variance).
  * That accomplishes:
    * No more covariate shift.
    * Fixes problems with vanishing gradients due to saturation.
  * Effects:
    * Networks learn faster. (As they don't have to adjust to covariate shift any more.)
    * Optimizes gradient flow in the network. (As the gradient becomes less dependent on the scale of the parameters and their initial values.)
    * Higher learning rates are possible. (Optimized gradient flow reduces risk of divergence.)
    * Saturating nonlinearities can be safely used. (Optimized gradient flow prevents the network from getting stuck in saturated modes.)
    * BN reduces the need for dropout. (As it has a regularizing effect.)
  * How BN works:
    * BN normalizes layer inputs to zero mean and unit variance. That is called *whitening*.
    * Naive method: Train on a batch. Update model parameters. Then normalize. Doesn't work: Leads to exploding biases while distribution parameters (mean, variance) don't change.
    * A proper method has to include the current example *and* all previous examples in the normalization step.
    * This leads to calculating in covariance matrix and its inverse square root. That's expensive. The authors found a faster way.

* (3) Normalization via Mini-Batch Statistics
  * Each feature (component) is normalized individually. (Due to cost, differentiability.)
  * Normalization according to: `componentNormalizedValue = (componentOldValue - E[component]) / sqrt(Var(component))`
  * Normalizing each component can reduce the expressitivity of nonlinearities. Hence the formula is changed so that it can also learn the identiy function.
  * Full formula: `newValue = gamma * componentNormalizedValue + beta` (gamma and beta learned per component)
  * E and Var are estimated for each mini batch.
  * BN is fully differentiable. Formulas for gradients/backpropagation are at the end of chapter 3 (page 4, left).

* (3.1) Training and Inference with Batch-Normalized Networks
  * During test time, E and Var of each component can be estimated using all examples or alternatively with moving averages estimated during training.
  * During test time, the BN formulas can be simplified to a single linear transformation.

* (3.2) Batch-Normalized Convolutional Networks
  * Authors recommend to place BN layers after linear/fully-connected layers and before the ninlinearities.
  * They argue that the linear layers have a better distribution that is more likely to be similar to a gaussian.
  * Placing BN after the nonlinearity would also not eliminate covariate shift (for some reason).
  * Learning a separate bias isn't necessary as BN's formula already contains a bias-like term (beta).
  * For convolutions they apply BN equally to all features on a feature map. That creates effective batch sizes of m\*pq, where m is the number of examples in the batch and p q are the feature map dimensions (height, width). BN for linear layers has a batch size of m.
  * gamma and beta are then learned per feature map, not per single pixel. (Linear layers: Per neuron.)

* (3.3) Batch Normalization enables higher learning rates
  * BN normalizes activations.
  * Result: Changes to early layers don't amplify towards the end.
  * BN makes it less likely to get stuck in the saturating parts of nonlinearities.
  * BN makes training more resilient to parameter scales.
  * Usually, large learning rates cannot be used as they tend to scale up parameters. Then any change to a parameter amplifies through the network and can lead to gradient explosions.
  * With BN gradients actually go down as parameters increase. Therefore, higher learning rates can be used.
  * (something about singular values and the Jacobian)

* (3.4) Batch Normalization regularizes the model
  * Usually: Examples are seen on their own by the network.
  * With BN: Examples are seen in conjunction with other examples (mean, variance).
  * Result: Network can't easily memorize the examples any more.
  * Effect: BN has a regularizing effect. Dropout can be removed or decreased in strength.

* (4) Experiments
* (4.1) Activations over time
** They tested BN on MNIST with a 100x100x10 network. (One network with BN before each nonlinearity, another network without BN for comparison.)
** Batch Size was 60.
** The network with BN learned faster. Activations of neurons (their means and variances over several examples) seemed to be more consistent during training.
** Generalization of the BN network seemed to be better.

* (4.2) ImageNet classification
** They applied BN to the Inception network.
** Batch Size was 32.
** During training they used (compared to original Inception training) a higher learning rate with more decay, no dropout, less L2, no local response normalization and less distortion/augmentation.
** They shuffle the data during training (i.e. each batch contains different examples).
** Depending on the learning rate, they either achieve the same accuracy (as in the non-BN network) in 14 times fewer steps (5x learning rate) or a higher accuracy in 5 times fewer steps (30x learning rate).
** BN enables training of Inception networks with sigmoid units (still a bit lower accuracy than ReLU).
** An ensemble of 6 Inception networks with BN achieved better accuracy than the previously best network for ImageNet.

* (5) Conclusion
** BN is similar to a normalization layer suggested by Gülcehre and Bengio. However, they applied it to the outputs of nonlinearities.
** They also didn't have the beta and gamma parameters (i.e. their normalization could not learn the identity function).

We want to find two matrices $W$ and $H$ such that $V = WH$. Often a goal is to determine underlying patterns in the relationships between the concepts represented by each row and column. $W$ is some $m$ by $n$ matrix and we want the inner dimension of the factorization to be $r$. So 

$$\underbrace{V}_{m \times n} = \underbrace{W}_{m \times r} \underbrace{H}_{r \times n}$$

Let's consider an example matrix where of three customers (as rows) are associated with three movies (the columns) by a rating value.

$$
V = \left[\begin{array}{c c c}
5 & 4 & 1  \\\\
4 & 5 & 1 \\\\
2 & 1 & 5
\end{array}\right]
$$


We can decompose this into two matrices with $r = 1$. First lets do this without any non-negative constraint using an SVD reshaping matrices based on removing eigenvalues:


$$
W = \left[\begin{array}{c c c}
-0.656 \\\
 -0.652 \\\
 -0.379
\end{array}\right],
H = \left[\begin{array}{c c c}
-6.48 & -6.26 & -3.20\\\\
\end{array}\right]
$$

We can also decompose this into two matrices with $r = 1$ subject to the constraint that $w_{ij} \ge 0$ and  $h_{ij} \ge 0$. (Note: this is only possible when $v_{ij} \ge 0$):

$$
W = \left[\begin{array}{c c c}
0.388 \\\\
0.386 \\\\
0.224
\end{array}\right],
H = \left[\begin{array}{c c c}
11.22 & 10.57 & 5.41  \\\\
\end{array}\right]
$$

Both of these $r=1$ factorizations reconstruct matrix $V$ with the same error. 

$$
V \approx WH = \left[\begin{array}{c c c}
4.36 & 4.11 & 2.10 \\\
4.33 & 4.08 & 2.09 \\\
2.52 & 2.37 & 1.21 \\\
\end{array}\right]
$$


If they both yield the same reconstruction error then why is a non-negativity constraint useful? We can see above that it is easy to observe patterns in both factorizations such as similar customers and similar movies. `TODO: motivate why NMF is better`



#### Paper Contribution 

This paper discusses two approaches for iteratively creating a non-negative $W$ and $H$ based on random initial matrices. The paper discusses a multiplicative update rule where the elements of $W$ and $H$ are iteratively transformed by scaling each value such that error is not increased. 

The multiplicative approach is discussed in contrast to an additive gradient decent based approach where small corrections are iteratively applied. The multiplicative approach can be reduced to this by setting the learning rate ($\eta$) to a ratio that represents the magnitude of the element in $H$ to the scaling factor of $W$ on $H$.



### Still a draft

(See also a more thorough summary in [a LaTeX PDF][1].)

This paper has some nice clear theory which bridges maximum likelihood (supervised) learning and standard reinforcement learning. It focuses on *structured prediction* tasks, where we want to learn to predict $p_\theta(y \mid x)$ where $y$ is some object with complex internal structure.

We can agree on some deficiencies of maximum likelihood learning:

- ML training fails to assign **partial credit**. Models are trained to maximize the likelihood of the ground-truth outputs in the dataset, and all other outputs are equally wrong. This is an increasingly important problem as the space of possible solutions grows.
- ML training is potentially disconnected from **downstream task reward**. In machine translation, we usually want to optimize relatively complex metrics like BLEU or TER. Since these metrics are non-differentiable, we have to settle for optimizing proxy losses that we hope are related to the metric of interest.

Reinforcement learning offers an attractive alternative in theory. RL algorithms are designed to optimize non-differentiable (even stochastic) reward functions, which sounds like just what we want. But RL algorithms have their own problems with this sort of structured output space:

- Standard RL algorithms rely on samples from the model we are learning, $p_\theta(y \mid x)$. This becomes intractable when our output space is very complex (e.g. 80-token sequences where each word is drawn from a vocabulary of 80,000 words).
- The reward spaces for problems of interest are extremely sparse. Our metrics will assign 0 reward to most of the 80^80K possible outputs in the translation problem in the paper.
- Vanilla RL doesn't take into account the ground-truth outputs available to us in structured prediction.

This paper designs a solution which combines supervised learning with a reinforcement learning-inspired smoothing method. Concretely, the authors design an **exponentiated payoff distribution** $q(y \mid y^*; \tau)$ which assigns high mass to high-reward outputs $y$ and low mass elsewhere. This distribution is used to effectively smooth the loss function established by the ground-truth outputs in the supervised data. We end up optimizing the following objective:

$$\mathcal L_\text{RML} = - \mathbb E_{x, y^* \sim \mathcal D}\left[ \sum_y q(y \mid y^*; \tau) \log p_\theta(y \mid x) \right]$$

This optimization depends on samples from our dataset $\mathcal D$ and, more importantly, the stationary payoff distribution $q$. This contrasts strongly with standard RL training, where the objective depends on samples from the non-stationary model distribution $p_\theta$. To make that clear, we can rewrite the above with another expectation:

$$\mathcal L_\text{RML} = - \mathbb E_{x, y^* \sim \mathcal D, y \sim q(y \mid y^*; \tau)}\left[ \log p_\theta(y \mid x) \right]$$

### Model details

If you're interested in the low-level details, I wrote up the gist of the math in [this PDF][1].

### Analysis

#### Relationship to label smoothing

This training approach is mathematically equivalent to label smoothing, applied here to structured output problems. In next-word prediction language modeling, a popular trick involves smoothing the target distributions by combining the ground-truth output with some simple base model, e.g. a unigram word frequency distribution. (This just means we take a weighted sum of the one-hot vector from our supervised data and a normalized frequency vector calculated on some corpus.) Mathematically, the cross entropy with label smoothing is

$$\mathcal L_\text{ML-smooth} = - \mathbb E_{x, y^* \sim \mathcal D} \left[ \sum_y p_\text{smooth}(y; y^*) \log p_\theta(y \mid x) \right]$$

(The equation above leaves out a constant entropy term.)

The gradient of this objective looks exactly the same as the reward-augmented ML gradient from the paper:

$$\nabla_\theta \mathcal L_\text{ML-smooth} = \mathbb E_{x, y^* \sim \mathcal D, y \sim p_\text{smooth}} \left[ \log p_\theta(y \mid x) \right]$$

So reward-augmented likelihood is equivalent to label smoothing, where our smoothing distribution is log-proportional to our downstream reward function.

#### Relationship to distillation

Optimizing the reward-augmented maximum likelihood is equivalent to minimizing the KL divergence $$D_\text{KL}(q(y \mid y^*; \tau) \mid\mid p_\theta(y \mid x))$$

This divergence reaches zero iff $q = p$. We can say, then, that the effect of optimizing on $\mathcal L_\text{RML}$ is to **distill** the reward function (which parameterizes $q$) into the model parameters $\theta$ (which parameterize $p_\theta$).

It's exciting to think about other sorts of more complex models that we might be able to distill in this framework. The unfortunate (?) restriction is that the "source" model of the distillation ($q$ in this paper) must admit to efficient sampling.

#### Relationship to adversarial training

We can also view reward-augmented maximum likelihood training as a data augmentation technique: it synthesizes new "partially correct" examples using the reward function as a guide. We then train on all of the original and synthesized data, again weighting the gradients based on the reward function.

Adversarial training is a similar data augmentation technique which generates examples that force the model to be robust to changes in its input space (robust to changes of $x$). Both adversarial training and the RML objective encourage the model to be robust "near" the ground-truth supervised data. A high-level comparison:

- Adversarial training can be seen as data augmentation in the input space; RML training performs data augmentation in the output space.
- Adversarial training is a **model-based data augmentation**: the samples are generated from a process that depends on the current parameters during training. RML training performs **data-based augmentation**, which could in theory be done independent of the actual training process.

---

Thanks to Andrej Karpathy, Alec Radford, and Tim Salimans for interesting discussion which contributed to this summary.

[1]: https://drive.google.com/file/d/0B3Rdm_P3VbRDVUQ4SVBRYW82dU0/view