This paper describes a class of algorithms for classification or regression in the on-line setting.  That is, the data is a bunch of pairs $(X_t,Y_t)$ (where X may be a vector), and these data items arrive in some order: the algorithm must predict each $\hat{Y}_t$ using only the $X_t$ and previously seen pairs. In the regression setting, each mis-prediction has a loss that is like $(Y_t - \hat{Y}_t)^2$, and in the classification setting $Y_t$ is always 0 or 1 and the loss is $| Y_t - \hat{Y}_t |$.

Roughly, the algorithm makes linear predictions using some internal weight vector $(\hat{y} = w  * X)$, and does a gradient-descent like weight update. However, it tries to keep the q-norm (q can be any number) of the weight vector "small", preventing the weights themselves from becoming too large. The algorithm is actually simple, and the weight update takes advantage of link functions, which the author defines.  The majority of the paper is focused on deriving loss bounds, showing that the loss incurred by this algorithm isn't much worse than that incurred by the best weight vector, chosen in hindsight.  Typical readers will be interested in the first few pages, as the latter part of the paper is mainly technical proofs.

### What is BN:
  * Batch Normalization (BN) is a normalization method/layer for neural networks.
  * Usually inputs to neural networks are normalized to either the range of [0, 1] or [-1, 1] or to mean=0 and variance=1. The latter is called *Whitening*.
  * BN essentially performs Whitening to the intermediate layers of the networks.

### How its calculated:
  * The basic formula is $x^* = (x - E[x]) / \sqrt{\text{var}(x)}$, where $x^*$ is the new value of a single component, $E[x]$ is its mean within a batch and `var(x)` is its variance within a batch.
  * BN extends that formula further to $x^{**} = gamma * x^* +$ beta, where $x^{**}$ is the final normalized value. `gamma` and `beta` are learned per layer. They make sure that BN can learn the identity function, which is needed in a few cases.
  * For convolutions, every layer/filter/kernel is normalized on its own (linear layer: each neuron/node/component). That means that every generated value ("pixel") is treated as an example. If we have a batch size of N and the image generated by the convolution has width=P and height=Q, we would calculate the mean (E) over `N*P*Q` examples (same for the variance).

### Theoretical effects:
  * BN reduces *Covariate Shift*. That is the change in distribution of activation of a component. By using BN, each neuron's activation becomes (more or less) a gaussian distribution, i.e. its usually not active, sometimes a bit active, rare very active.
  * Covariate Shift is undesirable, because the later layers have to keep adapting to the change of the type of distribution (instead of just to new distribution parameters, e.g. new mean and variance values for gaussian distributions).
  * BN reduces effects of exploding and vanishing gradients, because every becomes roughly normal distributed. Without BN, low activations of one layer can lead to lower activations in the next layer, and then even lower ones in the next layer and so on.

### Practical effects:
  * BN reduces training times. (Because of less Covariate Shift, less exploding/vanishing gradients.)
  * BN reduces demand for regularization, e.g. dropout or L2 norm. (Because the means and variances are calculated over batches and therefore every normalized value depends on the current batch. I.e. the network can no longer just memorize values and their correct answers.)
  * BN allows higher learning rates. (Because of less danger of exploding/vanishing gradients.)
  * BN enables training with saturating nonlinearities in deep networks, e.g. sigmoid. (Because the normalization prevents them from getting stuck in saturating ranges, e.g. very high/low values for sigmoid.)


![MNIST and neuron activations](https://raw.githubusercontent.com/aleju/papers/master/neural-nets/images/Batch_Normalization__performance_and_activations.png?raw=true "MNIST and neuron activations")

*BN applied to MNIST (a), and activations of a randomly selected neuron over time (b, c), where the middle line is the median activation, the top line is the 15th percentile and the bottom line is the 85th percentile.*

-------------------------

### Rough chapter-wise notes

* (2) Towards Reducing Covariate Shift
  * Batch Normalization (*BN*) is a special normalization method for neural networks.
  * In neural networks, the inputs to each layer depend on the outputs of all previous layers.
  * The distributions of these outputs can change during the training. Such a change is called a *covariate shift*.
  * If the distributions stayed the same, it would simplify the training. Then only the parameters would have to be readjusted continuously (e.g. mean and variance for normal distributions).
  * If using sigmoid activations, it can happen that one unit saturates (very high/low values). That is undesired as it leads to vanishing gradients for all units below in the network.
  * BN fixes the means and variances of layer inputs to specific values (zero mean, unit variance).
  * That accomplishes:
    * No more covariate shift.
    * Fixes problems with vanishing gradients due to saturation.
  * Effects:
    * Networks learn faster. (As they don't have to adjust to covariate shift any more.)
    * Optimizes gradient flow in the network. (As the gradient becomes less dependent on the scale of the parameters and their initial values.)
    * Higher learning rates are possible. (Optimized gradient flow reduces risk of divergence.)
    * Saturating nonlinearities can be safely used. (Optimized gradient flow prevents the network from getting stuck in saturated modes.)
    * BN reduces the need for dropout. (As it has a regularizing effect.)
  * How BN works:
    * BN normalizes layer inputs to zero mean and unit variance. That is called *whitening*.
    * Naive method: Train on a batch. Update model parameters. Then normalize. Doesn't work: Leads to exploding biases while distribution parameters (mean, variance) don't change.
    * A proper method has to include the current example *and* all previous examples in the normalization step.
    * This leads to calculating in covariance matrix and its inverse square root. That's expensive. The authors found a faster way.

* (3) Normalization via Mini-Batch Statistics
  * Each feature (component) is normalized individually. (Due to cost, differentiability.)
  * Normalization according to: `componentNormalizedValue = (componentOldValue - E[component]) / sqrt(Var(component))`
  * Normalizing each component can reduce the expressitivity of nonlinearities. Hence the formula is changed so that it can also learn the identiy function.
  * Full formula: `newValue = gamma * componentNormalizedValue + beta` (gamma and beta learned per component)
  * E and Var are estimated for each mini batch.
  * BN is fully differentiable. Formulas for gradients/backpropagation are at the end of chapter 3 (page 4, left).

* (3.1) Training and Inference with Batch-Normalized Networks
  * During test time, E and Var of each component can be estimated using all examples or alternatively with moving averages estimated during training.
  * During test time, the BN formulas can be simplified to a single linear transformation.

* (3.2) Batch-Normalized Convolutional Networks
  * Authors recommend to place BN layers after linear/fully-connected layers and before the ninlinearities.
  * They argue that the linear layers have a better distribution that is more likely to be similar to a gaussian.
  * Placing BN after the nonlinearity would also not eliminate covariate shift (for some reason).
  * Learning a separate bias isn't necessary as BN's formula already contains a bias-like term (beta).
  * For convolutions they apply BN equally to all features on a feature map. That creates effective batch sizes of m\*pq, where m is the number of examples in the batch and p q are the feature map dimensions (height, width). BN for linear layers has a batch size of m.
  * gamma and beta are then learned per feature map, not per single pixel. (Linear layers: Per neuron.)

* (3.3) Batch Normalization enables higher learning rates
  * BN normalizes activations.
  * Result: Changes to early layers don't amplify towards the end.
  * BN makes it less likely to get stuck in the saturating parts of nonlinearities.
  * BN makes training more resilient to parameter scales.
  * Usually, large learning rates cannot be used as they tend to scale up parameters. Then any change to a parameter amplifies through the network and can lead to gradient explosions.
  * With BN gradients actually go down as parameters increase. Therefore, higher learning rates can be used.
  * (something about singular values and the Jacobian)

* (3.4) Batch Normalization regularizes the model
  * Usually: Examples are seen on their own by the network.
  * With BN: Examples are seen in conjunction with other examples (mean, variance).
  * Result: Network can't easily memorize the examples any more.
  * Effect: BN has a regularizing effect. Dropout can be removed or decreased in strength.

* (4) Experiments
* (4.1) Activations over time
** They tested BN on MNIST with a 100x100x10 network. (One network with BN before each nonlinearity, another network without BN for comparison.)
** Batch Size was 60.
** The network with BN learned faster. Activations of neurons (their means and variances over several examples) seemed to be more consistent during training.
** Generalization of the BN network seemed to be better.

* (4.2) ImageNet classification
** They applied BN to the Inception network.
** Batch Size was 32.
** During training they used (compared to original Inception training) a higher learning rate with more decay, no dropout, less L2, no local response normalization and less distortion/augmentation.
** They shuffle the data during training (i.e. each batch contains different examples).
** Depending on the learning rate, they either achieve the same accuracy (as in the non-BN network) in 14 times fewer steps (5x learning rate) or a higher accuracy in 5 times fewer steps (30x learning rate).
** BN enables training of Inception networks with sigmoid units (still a bit lower accuracy than ReLU).
** An ensemble of 6 Inception networks with BN achieved better accuracy than the previously best network for ImageNet.

* (5) Conclusion
** BN is similar to a normalization layer suggested by Gülcehre and Bengio. However, they applied it to the outputs of nonlinearities.
** They also didn't have the beta and gamma parameters (i.e. their normalization could not learn the identity function).

This very new paper, is currently receiving quite a bit of attention by the [community](https://www.reddit.com/r/MachineLearning/comments/5qxoaz/r_170107875_wasserstein_gan/).

The paper describes a new training approach, which solves the two major practical problems with current GAN training:

1) The training process comes with a meaningful loss. This can be used as a (soft) performance metric and will help debugging, tune parameters and so on.

2) The training process does not suffer from all the instability problems. In particular the paper reduces mode collapse significantly.

On top of that, the paper comes with quite a bit mathematical theory, explaining why there approach works and other approachs have failed. This paper is a must read for anyone interested in GANs.

An attention mechanism and a separate encoder/decoder are two properties of almost every single neural translation model. The question asked in this paper is- how far can we go without attention and without a separate encoder and decoder? And the answer is- pretty far! The model presented preforms just as well as the attention model of Bahdanau on the four language directions that are studied in the paper.

The translation model presented in the paper is basically a simple recurrent language model. A recurrent language model receives at every timestep the current input word and has to predict the next word in the dataset. To translate with such a model, simply give it the current word from the source sentence and have it try to predict the next word from the target sentence.

Obviously, in many cases such a simple model wouldn't work. For example, if your sentence was "The white dog" and you wanted to translate to Spanish ("El perro blanco"), at the 2nd timestep, the input would be "white" and the expected output would be "perro" (dog). But how could the model predict "perro" when it hasn't seen "dog" yet?

To solve this issue, we preprocess the data before training and insert "empty" padding tokens into the target sentence. When the model outputs such a token, it means that the model would like to read more of the input sentence before emitting the next output word.

So in the example from above, we would change the target sentence to "El PAD perro blanco". Now, at timestep 2 the model emits the PAD symbol. At timestep 3, when the input is "dog", the model can emit the token "perro". These padding symbols are deleted in post-processing, before the output is returned to the user. You can see a visualization of the decoding process below:

https://i.imgur.com/znI6xoN.png

To enable us to use beam search, our model actually receives the previous outputted target token in addition to receiving the current source token at every timestep.

PyTorch code for the model is available at https://github.com/ofirpress/YouMayNotNeedAttention 

Offline reinforcement learning is potentially high-value thing for the machine learning community learn to do well, because there are many applications where it'd be useful to generate a learnt policy for responding to a dynamic environment, but where it'd be too unsafe or expensive to learn in an on-policy or online way, where we continually evaluate our actions in the environment to test their value. In such settings, we'd like to be able to take a batch of existing data - collected from a human demonstrator, or from some other algorithm - and be able to learn a policy from those pre-collected transitions, without being able to query the environment further by taking arbitrary actions. 

There are two broad strategies for learning a policy from precollected transitions. One is to simply learn to mimic the action policy used by the demonstrator, predicting the action the demonstrator would take in a given state, without making use of reward data at all. This is Behavioral Cloning, and has the advantage of being somewhat more conservative (in terms of not experimenting with possibly-unsafe-or-low-reward actions the demonstrator never took), but this is also a disadvantage, because it's not possible to get higher reward than the demonstrator themselves got if you're simply copying their behavior. Another approach is to learn a Q function - estimating the value of a given action in a given state - using the reward data from the precollected transitions. This can also have some downsides, mostly in the direction of overconfidence. Q value Temporal Difference learning works by using the current reward added to the max Q value over possible next actions as the target for the current-state Q estimate. This tends to lead to overestimates, because regression to the mean effects mean that the highest value Q estimates are disproportionately likely to be noisy (possibly because they correspond to an action with little data in the demonstrator dataset). In on-policy Q learning, this is less problematic, because the agent can take the action associated with their noisily inaccurate estimate, and as a result get more data for that action, and get an estimate that is less noisy in future. But when we're in a fully offline setting, all our learning is completed before we actually start taking actions with our policy, so taking high-uncertainty actions isn't a valuable source of new information, but just risky. 

The approach suggested by this DeepMind paper - Critic Regularized Regression, or CRR - is essentially a synthesis of these two possible approaches. The method learns a Q function as normal, using temporal difference methods. The distinction in this method comes from how to get a policy, given a learned Q function. Rather than simply taking the action your Q estimate says is highest-value at a particular point, CRR optimizes a policy according to the formula shown below. The f() function is a stand-in for various potential functions, all of which are monotonic with respect to the Q function, meaning they increase when the Q function does. 

https://i.imgur.com/jGmhYdd.png

This basically amounts to a form of a behavioral cloning loss (with the part that maximizes the probability under your policy of the actions sampled from the demonstrator dataset), but weighted or, as the paper terms it, filtered, by the learned Q function. The higher the estimated q value for a transition, the more weight is placed on that transition from the demo dataset having high probability under your policy. Rather than trying to mimic all of the actions of the demonstrator, the policy preferentially tries to mimic the demonstrator actions that it estimates were particularly high-quality. Different f() functions lead to different kinds of filtration. The `binary`version is an indicator function for the Advantage of an action (the Q value for that action at that state minus some reference value for the state, describing how much better the action is than other alternatives at that state) being greater than zero. Another, `exp`, uses exponential weightings which do a more "soft" upweighting or downweighting of transitions based on advantage, rather than the sharp binary of whether an actions advantage is above 1. 

The authors demonstrate that, on multiple environments from three different environment suites, CRR outperforms other off-policy baselines - either more pure behavioral cloning, or more pure RL - and in many cases does so quite dramatically. They find that the sharper binary weighting scheme does better on simpler tasks, since the trade-off of fewer but higher-quality samples to learn from works there. However, on more complex tasks, the policy benefits from the exp weighting, which still uses and learns from more samples (albeit at lower weights), which introduces some potential mimicking of lower-quality transitions, but at the trade of a larger effective dataset size to learn from.