TLDR; The authors propose an importance-sampling approach to deal with large vocabularies in NMT models. During training, the corpus is partitioned, and for each partition only target words occurring in that partition are chosen. To improve decoding speed over the full vocabulary, the authors build a dictionary mapping from source sentence to potential target vocabulary. The authors evaluate their approach on standard MT tasks and perform better than the baseline models with smaller vocabulary.

#### Key Points:

- Computing partition function is the bottleneck. Use sampling-based approach.
- Dealing with large vocabulary during training is separate from dealing with large vocab during decoding. Training is handled with importance sampling. Decoding is handled with source-based candidate list.
- Decoding with candidate list takes around 0.12s (0.05) per token on CPU (GPU). Without target list 0.8s (0.25s).
- Issue: Candidate list is depended on source sentence, so it must be re-computed for each sentence. 
- Reshuffling the data set is expensive as new partitions need to be calculated (not necessary, but improved scores).

#### Notes:

- How is the corpus partitioned? What's the effect of the partitioning strategy?
- The authors say that they replace UNK tokens using "another word alignment model" but don't go into detail what this is. The results show that doing this results in much larger score bump than increasing the vocab does. (The authors do this for all comparison models though).
- Reshuffling the dataset also results in a significant performance bump, but this operation is expensive. IMO the authors should take all these into account when reporting performance numbers. A single training update may be a lot faster, but the setup time increases. I'd would've like to see the authors assign a global time budget to train/test and then compare the models based on that.
- The authors only briefly mentioned that re-building the target vocab for each source sentence is an issue and how they solve it, no details given.

This paper presents a novel layer that can be used in convolutional neural networks. A spatial transformer layer computes re-sampling points of the signal based on another neural network. The suggested transformations include scaling, cropping, rotations and non-rigid deformation whose paramerters are trained end-to-end with the rest of the model. The resulting re-sampling grid is then used to create a new representation of the underlying signal through bi-linear or nearest neighbor interpolation. This has interesting implications: the network can learn to co-locate objects in a set of images that all contain the same object, the transformation parameter localize the attention area explicitly, fine data resolution is restricted to areas important for the task. Furthermore, the model improves over previous state-of-the-art on a number of tasks.

The layer has one mini neural network that regresses on the parameters of a parametric transformation, e.g. affine), then there is a module that applies the transformation to a regular grid and a third more or less "reads off" the values in the transformed positions and maps them to a regular grid, hence under-forming the image or previous layer. Gradients for back-propagation in a few cases are derived. The results are mostly of the classic deep learning variety, including mnist and svhn, but there is also the fine-grained birds dataset. The networks with spatial transformers seem to lead to improved results in all cases.

# Object detection system overview.

https://i.imgur.com/vd2YUy3.png
 
1.	takes an input image,
2.	extracts around 2000 bottom-up region proposals, 
3.	computes features for each proposal using a large convolutional neural network (CNN), and then
4.	classifies each region using class-specific linear SVMs.
* R-CNN achieves a mean average precision (mAP) of 53.7% on PASCAL VOC 2010.
* On the 200-class ILSVRC2013 detection dataset, R-CNN’s mAP is 31.4%, a large improvement over OverFeat , which had the previous best result at 24.3%.

## There is a 2 challenges faced in object detection 
1.	localization problem
2.	labeling the data

1 localization problem :
*  One approach frames localization as a regression problem.  they report a mAP of 30.5% on VOC 2007 compared to the 58.5% achieved by our method.
* An alternative is to build a sliding-window detector.  considered adopting a sliding-window approach increases the number of convolutional layers to 5, have very large receptive fields (195 x 195 pixels) and strides (32x32 pixels) in the input image, which makes precise localization within the sliding-window paradigm.

2 labeling the data:
* The conventional solution to this problem is to use unsupervised pre-training, followed by supervise fine-tuning 
* supervised pre-training on a large auxiliary dataset (ILSVRC), followed by domain specific fine-tuning on a small dataset (PASCAL),
* fine-tuning for detection improves mAP performance by 8 percentage points. 
* Stochastic gradient descent via back propagation was used to  effective for training convolutional neural networks (CNNs)
 
##  Object detection with R-CNN
This  system consists of three modules
* The first generates category-independent region proposals. These proposals define the set of candidate detections available to our detector.
*  The second module is a large convolutional neural network that extracts a fixed-length feature vector from each region.
* The third module is a set of class specific linear SVMs.

Module design

1 Region proposals 
* which detect mitotic cells by applying a CNN to regularly-spaced square crops.
* use selective search method in fast mode (Capture All Scales, Diversification, Fast to Compute).
* the time spent computing region proposals and features (13s/image on a GPU or 53s/image on a CPU)

2 Feature extraction.
* extract a 4096-dimensional feature vector from each region proposal using the Caffe  implementation of the CNN 
* Features are computed by forward propagating a mean-subtracted 227x227 RGB image through five convolutional layers and two fully connected layers.
* warp all pixels in a tight bounding box around it to the required size
* The feature matrix is typically 2000x4096 

3 Test time detection
* At test time, run selective search on the test image to extract around 2000 region proposals (we use selective search’s “fast mode” in all experiments).
*  warp each proposal and forward propagate it through the CNN in order to compute features. Then, for each class, we score each extracted feature vector using the SVM trained for that class.
* Given all scored regions in an image, we apply a greedy non-maximum suppression (for each class independently) that rejects a region if it has an intersection-over union (IoU) overlap with a higher scoring selected region larger than a learned threshold.
## Training

1 Supervised pre-training:
 * pre-trained the CNN on a large auxiliary dataset (ILSVRC2012 classification)  using image-level annotations only (bounding box labels are not available for this data)

2  Domain-specific fine-tuning.
* use the stochastic gradient descent (SGD) training of the CNN parameters using only warped region proposals with  learning rate of 0.001.

3  Object category classifiers.
*   use intersection-over union (IoU) overlap threshold method  to label a region with The overlap threshold of 0.3.
* Once features are extracted and training labels are applied, we optimize one linear SVM per class.
* adopt the standard hard negative mining method to fit large training data in memory.

### Results on PASCAL VOC 201012

1  VOC 2010
* compared against four strong baselines including SegDPM, DPM, UVA, Regionlets. 
* Achieve a large improvement in mAP, from 35.1% to 53.7% mAP,  while also being much faster
 https://i.imgur.com/0dGX9b7.png
2 ILSVRC2013 detection.
* ran R-CNN on the 200-class ILSVRC2013 detection dataset
* R-CNN achieves a mAP of 31.4%
https://i.imgur.com/GFbULx3.png
#### Performance layer-by-layer, without fine-tuning
1 pool5 layer 
* which is the max pooled output of the network’s fifth and final convolutional layer.
*The pool5 feature map is 6 x6 x 256 = 9216 dimensional
* each pool5 unit has a receptive field of 195x195 pixels in the original 227x227 pixel input

2 Layer fc6
* fully connected to pool5
*  it multiplies a 4096x9216 weight matrix by the pool5 feature map (reshaped as a 9216-dimensional vector) and then adds a vector of biases

3 Layer fc7
* It is implemented by multiplying the features computed by fc6 by a 4096 x 4096 weight matrix, and similarly adding a vector of biases and applying half-wave rectification
#### Performance layer-by-layer, with fine-tuning
* CNN’s parameters  fine-tuned on PASCAL.
* fine-tuning increases mAP by 8.0 % points to 54.2%

### Network architectures
* 16-layer deep network, consisting of 13 layers of 3 _ 3 convolution kernels, with five max pooling layers interspersed, and topped with three fully-connected layers. We refer to this network as “O-Net” for OxfordNet and the baseline as “T-Net” for TorontoNet.
* RCNN with O-Net substantially outperforms R-CNN with TNet, increasing mAP from 58.5% to 66.0%
* drawback in terms of compute time, with in terms of compute time, with than T-Net.

1 The ILSVRC2013 detection dataset
* dataset is split into three sets: train (395,918), val (20,121), and test (40,152) 

#### CNN features for segmentation.
* full R-CNN: The first strategy (full) ignores the re region’s shape and computes CNN features directly on the warped window. Two regions might have very similar bounding boxes while having very little overlap. 
* fg R-CNN: the second strategy (fg) computes CNN features only on a region’s foreground mask. We replace the background with the mean input so that background regions are zero after mean subtraction.
* full+fg R-CNN: The third strategy (full+fg) simply concatenates the full and fg features
 https://i.imgur.com/n1bhmKo.png

This paper presents a model that can dynamically split computation across coarse, low-capacity sub-networks and fine, high-capacity sub-networks. The coarse model processes the entire input data and is typically shallow while the fine model focuses on a few important regions of the input and is deeper. For images as input, this is a hard attention mechanism that can be trained with stochastic gradient descent and doesn't require a task-specific attention policy trained by reinforcement learning. Key ideas:

- A deep network h can be decomposed into bottom layers f and top layers g such that $h(x) = g(f(x))$. Further, f consists of two alternate sub-networks $f\_c$ and $f\_f$. $f\_c$ is a low-capacity sub-network while $f\_f$ is a high-capacity sub-network.

- g should be able to use representations from $f\_c$ and $f\_f$ dynamically. $f\_c$ processes the entire input while $f\_f$ only a few important regions of the input.

- The coarse model processes the entire input and the norm of the gradient of the entropy with respect to the coarse vector at each spatial region is computed which is a measure of saliency. The use of the entropy gradient as a saliency measure encourages selecting input regions that could affect the uncertainty in the model’s predictions the most.

- The top-k input regions with highest saliency values are processed by the fine model. The refined representation for input to the top layers consists of both coarse and fine vectors. During backpropagation, gradients are computed for the refined model, i.e. propagating gradients at each position into either the coarse or fine features, depending on which was used.

- To make sure $f\_c$ and $f\_f$ representations are interchangeable and input to the top layers has smooth transitions, an additional objective term minimizes the squared distance between coarse and fine representations and this additional term is used only to optimize the coarse layers, not the fine layers.

- Experiments on cluttered MNIST, SVHN and comparison with RAM, DRAW and study with various values of number of patches for fine processing.

## Strengths

- Neat, general way to split computation based on importance of input; a hard-attention mechanism that can be trained with SGD, unlike RAM.

- Entropy gradient as a measure of saliency is an interesting idea, and it doesn't need labels i.e. can be used at test time.

DRL has lot of disadvantages like large data requirement, slow learning, difficult interpretation, difficult transfer, no causality, analogical reasoning done at a statistical level not at a abstract level etc. This can be overcome by adding a symbolic front end on top of DL layer before feeding it to RL agent. Symbolic front end gives advantage of smaller state space generalization, flexible predicate length and easier combination of predicate expressions. DL avoids manual creation of features unlike symbolic reasoning. Hence DL along with symbolic reasoning might be the way to progress for AGI. State space reduction in symbolic reasoning is carried out by using object interactions(object positions and object types) for state representation. Although certain assumptions are made in the process such as objects of same type behave similarly etc, one can better understand causal relations in terms of actions, object interactions and reward by using symbolic reasoning. 

Broadly, pipeline consists of (1)CNN layer - Raw pixels to representation (2)Salient pixel identification - Pixels that have activations in CNN above a certain threshold (3)Identify objects of similar kind by using activation spectra of salient pixels (4)Identify similar objects in consecutive time steps to track object motion using spatial closeness(as objects can move only by a small distance in consecutive frames) and similar neighbors(different type of objects can be placed close to each other and spatial closeness alone cannot identify similar objects) (4)Building symbolic interactions by using relative object positions for all pairs of objects located within a certain maximal distance. Relative object position is necessary to capture object dynamics. Maximal distance threshold is required to make the learning quicker eventhough it may reach a locally optimal policy (4)RL agent uses object interactions as states in Q-Learning update. Instead of using all object interactions in a frame as one state, number of states are further reduced by considering interactions between two types to be independent of other types and doing a Q-Learning update separately for each type pair. Intuitive explanation for doing so is to look at a frame as a set of independent object type interactions. Action choice at a state is then the one that maximizes sum of Q values across all type pairs. 

Results claim that using DRL with symbolic reasoning, transfer in policies can be observed by first training on evenly spaced grid world and using it for randomly spaced grid world with a performance close to 70% contrary to DQN that achieves 50% even after training for 1000 epochs with epoch length of 100.